How Much Does a Barndominium Cost in Mississippi?
National guides such as Angi's put barndominiums at about $230,000 on average, from about $112,800 for a 30 x 40 to $504,000 for a 60 x 70. Kits run $20,000 to $90,000 or more and slabs $4,000 to $12,500; land, septic and driveways are extra. Call (601) 706-3276 for a quote.
Barndominium prices swing widely with size, finish, land and site work, and every Mississippi builder quotes each job on its own. The ranges below come from national cost guides, mainly Angi's barndominium guide, and are framed as typical figures, not quotes. Use them to set a first budget, then call (601) 706-3276 for a written quote from an independent builder.
Cost by building size
| Building footprint | Square feet | Typical national-guide range |
|---|---|---|
| 30 x 40 | 1,200 | $112,800 to $144,000 |
| 40 x 60 | 2,400 | $225,600 to $288,000 |
| 40 x 75 | 3,000 | $282,000 to $360,000 |
| 60 x 60 | 3,600 | $338,400 to $432,000 |
| 60 x 70 | 4,200 | $394,800 to $504,000 |
The national average is about $230,000. Two homes with the same footprint can land at opposite ends of a range: one with stained concrete floors, an open loft and simple cabinets, the other with tile, custom millwork and 14-foot ceilings. A footprint that includes a large shop or porch area usually costs less than the same footprint finished entirely as living space.
What that means per square foot
Every row in the size table works out to roughly $94 to $120 per square foot of building, which is a handy check on any quote. A price well under that range usually means something is missing, often the interior, site work or septic. A price well over it usually reflects high-end finishes, very tall walls, a lot of glass or a difficult site. Ask the builder to split the price into shell, interior and site work so you can see where the money goes, and compare quotes on the same basis: total heated square feet, shop square feet and porch square feet listed separately.
Cost by component
| Item | Typical national-guide range |
|---|---|
| Kit (frame, panels, trim) | $20,000 to $90,000+ |
| Professional kit assembly | $25,000 to $50,000 |
| Licensed pros assembling a kit | $85 to $95 per sq ft |
| General contractor to move-in ready | An added $150 to $190 per sq ft |
| Concrete slab | $4,000 to $12,500 |
| Interior materials | $25,400 to $100,700+ |
| Flooring | $7,000 to $28,500 |
| Drywall and interior work | $5,000 to $30,000 |
| Land clearing | About $3,000 on average |
| Permits, where required | $1,200 to $2,000 |
| Gravel / asphalt driveway | $14 to $25 / $70 to $170 per foot |
| General contractor fee | 10% to 20% of the project |
Mississippi line items to budget for
- Septic. Most rural homes need an onsite system approved through the Mississippi State Department of Health. The system types allowed on your soil drive the price, so get the evaluation early. Our site prep and septic page lists the steps.
- Water. A rural water association meter and tap fee, a city tap, or a drilled well.
- Power. Line extension and transformer costs from your electric power association or utility.
- Soil work. A geotechnical report and engineered slab on expansive clay, or select fill on poor ground.
- Timber and stumps. Clearing cutover pine land can run well above the national clearing average; a timber sale may offset some of it.
- Wind engineering. Frames, doors and fastening for higher design wind speeds cost more near the Coast.
- Safe room. Published guides put one built into a new home at about $6,000 to $20,000.
- Insurance. Builder's risk during construction, and homeowner's coverage after; near the Coast, ask about wind coverage before you design.
Turnkey, shell or kit: how the totals compare
A turnkey contract rolls everything into one price and usually lands in the middle or upper part of the size ranges. A shell or dry-in package costs less up front, but you buy the interior materials and labor separately, and the national guides' $150 to $190 per square foot for a contractor to finish shows how fast that adds up. A kit is the lowest sticker price and the most work: the slab, erection, insulation and every interior trade are on you. Our shell page and kit page go deeper.
What pushes a Mississippi build over budget
- Site work priced as an allowance that runs out.
- A septic system type more expensive than assumed.
- Change orders after the kit or frame is ordered.
- Finish upgrades chosen during the build instead of before.
- Rain delays that stretch a construction loan's interest period.
Many owners hold back a contingency of 10 percent or more for these.
Where to save, and where not to
- Save: a simple rectangle with one roofline, standard door and window sizes, stained or sealed concrete floors, and porches added later.
- Save: finishing the shop side plainly, with exposed framing and a concrete floor, while the house gets the better finishes.
- Do not cut: insulation and moisture control under the metal, which protect everything inside.
- Do not cut: the soil work, slab design and frame engineering, because fixing a foundation or a frame later costs far more than doing it right.
- Do not cut: a written, itemized contract with a licensed builder.
How to compare builder quotes
- Confirm whether each price is turnkey or shell, and list what is excluded.
- Ask which items are fixed and which are allowances: site work, septic, driveway, cabinets, flooring.
- Compare the same square footage, insulation, windows, roof panels and finish level.
- Ask for the draw schedule and whether your lender approves it.
- Confirm the Mississippi residential builder license for any job over $50,000.
See our custom barndominium page and the financing and land checklist for the next steps.
Call and we will connect you with an independent local provider.
CALL NOW: (601) 706-3276